HITBOX SYN-MIG200 PRO MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and convenient to chose the welding mode, material, welding wires, tungsten rods, electorde and the workpiece thicness you need by spinning and pressing the buttons. It will show all the parameters clearly.This welder can weld Aluminum, iron, carbon steel, stainless steel, copper, etc. Package weight: 16.70KG(36.80LB). Package size:52X29X47.5cm(20.4711.4118.70in). Rated input voltage (V)-110V/220V. Rated input power (KW)-MIG: 5.7; TOG: 4.37; MMA: 6.3.
Rated input current (A)-MIG: 36.0; TIG: 28.1; MMA: 40.5. Rated input apparent power (KVA)-MIG: 7.8; TIG: 6.21; MMA: 8.9. Welding current adjust range (A)-10 200.Welding voltage adjust range (V)-10 26. 10min-25%, 200A; 60%, 150A; 100% 130A. No load voltage (V)-50V (adjustable). Power factor-MIG: 0.73; TIG: 0.70; MMA: 0.71.
Wire diameter(m): Fe: 0.6/0.8/1.0; Ss: 0.8/1.0; AI: 0.9/1.0; Flux: 0.9/1.0/1.2. Electrode Type:6013;7018;7014 etc. Wire diameter: 0.6/0.8/1.0mm(1kg/5kg). Electrode Diameter(mm): ø2.5, ø3.2, ø4.0. Welding materials: Iron, stainless steel, aluminum, galvanized sheet, carbon steel, copper and other metals.Why should choose SYN MIG200 PRO welder? Large-screen LCD display, intuitive and detailed understanding of welding parameters, making work easier, MCU control system, responds immediately to any changes.
It can be matched with spool welding gun, fast drawing welding, and improving welding efficiency. The Welder uses the average current control mode, and have general protection functions, for example the limited overshoot, the limit of the pulse width, overvoltage, over-current, over-heating and so on. Those functions obviously improve the stability and security of the welding machine. It will automatically enter the standby state if no load time exceeds three minutes, reducing power consumption. Ways welding parameters to use SYN-MIG200 Pro, 1-Semi-automatic welding.2-MIG MAG-Manual adjustment method liked by professional welders. Can make the aluminum profile thin plate not deformed, the thick plate has a high degree of fusion, and the weld seam is beautifully formed and the welding point is not black after the porosity welding.
When you use the 2T function, use the welding torch to lightly touch the switch to weld. When you use the 4T function, you can press the torch switch, you can continue welding, you don't need to hold the switch all the time, just press the switch to end the welding. MIG FUNCTION:MIX GAS can use 0.6/ 0.8/ 1.0/ 1.2mm flux wire.It can weld 0.7 6.4mm thickness. GAS (CO2) can use 0.8/ 1.0mm wire. Can weld 0.9 6.4mm thickness. TIG FUNCTION:Can use 1.6mm and 2.4mm tungsten. Can weld 0.7 6.4mm thickness. ARC FUNCTION:Current 10 170 amp.
Can weld 2.5/ 3.2 mm electrode. Can weld 1.6 3.4mm thickness. 1X SYN MIG200 PRO Mig welder.
1X Welding brush/ hammer combo. 1X 110V to 220V convert plug.
1 X 0.6mm/0.8mm V shape drive roller. 1 X 1.0mm/1.2mm U shape drive roller. 1X Graphite wire feed tube:when welding aluminum, please do use it with the mig gun.