HITBOX 250A Aluminum MIG Welder 110V/220V Dual Vol MIG/Lift TIG/Stick 4 in 1 Welding Machine Synergic setting: The wire feed speed and current will be auto fitted by input voltage. Manual setting: The wire feed speed and current can adjust by welding data. Digital Screen:The voltage and current are displayed in the panel Can be used with MIG gun with graphite wire feed tube for aluminum function Up to 250 A output that allows to weld mild steel up to 9/32 in plate.
Certificated by ETL: Intelligent protection includes over-voltage, over-current, over-heat protection. 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)Compatible with WP-17V 35-50 (not included inside product) Non noise: built with thermal original chip.. 4 IN 1 Aluminum MIG Welder 200A 110V/220V Inverter Lift TIG ARC Welding Machine. HITBOX 250A Aluminum MIG Welder 110V/220V Dual Voltage MIG/Lift TIG/Stick 4 in 1 Welding Machine. Synergic setting: The wire feed speed and current will be auto fitted by input voltage.
Digital Screen:The voltage and current are displayed in the panel. Can be used with MIG gun with graphite wire feed tube for aluminum function. Up to 250 A output that allows to weld mild steel up to 9/32 in plate. 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)Compatible with WP-17V 35-50 (not included inside product). Non noise: built with thermal original chip, the fan will not start until the temperature gets high.2 Wire feed Rolls included. U type wire roll is used for aluminum welding wire. V type wire roll is used for solid welding wire. Support MIG GAS, MIG WITHOUT GAS, LIFT TIG, MMA.
Multi-function mode to start your welder's journey. MIG: 15-200A; MMA: 40-170A; TIG lifting: 30-250A. With the synergic function, these parameters can be pre-programmed according to the diameter of the wire and the combination of gas and metal type to facilitate welding and ensure optimal welding. This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB15 Mig Gun, graphite wire feed tube, earth clamp, electrode holder, welding brush/ hammer combo, hose clamps, gas tube and US plug.
This welder features a easy carrying handle, compact design, easy for transportation and storage. 2T & 4T Functions: 2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T.
2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates. HITBOX gasless flux cored wire welder has two wire feeding wheels 0.6/0.8 and 1.0/1.2.
It can be matched with 1kg -5kg diameter 0.6/0.8/0.9/1.0 strong core welding wire. 2.5/3.2/4.0 acid electrodes (such as 6018/7013 electrodes). 2T/4T function supports long term welding. HIXBOX MIG250II MIG Welder 4 ways weld effect. Welding voltage range(MIG)(A).
Built-in hot start, arc-force, anti-stick and VRD. Wire feed speed range(m/min).
1.6 - 4.0 (1.6-4.0mm rod) 6013 can be used Very good, also 70180.6/0.8/0.9/10. 1x 110v to 220v adaptor.
Item Processing Time: The processing time for a specific order varies with the product type and stock status. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours.
Please let us know immediately if a package is damaged upon arrival.