Multi-function mode to start your welder's journey. MIG: 15-200A; MMA: 40-170A; TIG lifting: 30-250A. With the synergic function, these parameters can be pre-programmed according to the diameter of the wire and the combination of gas and metal type to facilitate welding and ensure optimal welding.This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB15 Mig Gun, graphite wire feed tube, earth clamp, electrode holder, welding brush/ hammer combo, hose clamps, gas tube and US plug.
This welder features a easy carrying handle, compact design, easy for transportation and storage. HITBOX gasless flux cored wire welder has two wire feeding wheels 0.6/0.8 and 1.0/1.2. It can be matched with 1kg -5kg diameter 0.6/0.8/0.9/1.0 strong core welding wire. 2.5/3.2/4.0 acid electrodes (such as 6018/7013 electrodes). 2T/4T function supports long term welding.
Easy Handle 1-5KG Welding Wire? The inverter welder could handle flux cored wire, solid wire, but not aluminium wire.
The wire feeder can internally handle a radius of 11.5cm spools of wire it accepts 1kg/5KG flux core wires(0.6-1.0mm) and 0.6/0.8/1.0mm solid wires to welding. Tip: please match the same diameter wire feed roller and nozzle.Automatic wire feed for easy access in tight spaces. HITBOX focuses on the welding machine industry for 8 years. Our 24-hour online customer service will help you solve your problems.
HITBOX 250A Aluminum MIG Welder 110V/220V Dual Voltage MIG/Lift TIG/Stick Gas&Gasless 4 in 1 Welding Machine. Synergic setting: The wire feed speed and current will be auto fitted by input voltage. Manual setting: The wire feed speed and current can adjust by welding data.Digital Screen:The voltage and current are displayed in the panel. Can be used with MIG gun with graphite wire feed tube for aluminum function. Up to 250 A output that allows to weld mild steel up to 9/32 in plate. Certificated by ETL: Intelligent protection includes over-voltage, over-current, over-heat protection. 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)Compatible with WP-17V 35-50 (not included inside product). Non noise: built with thermal original chip, the fan will not start until the temperature gets high. 2 Wire feed Rolls included.
U type wire roll is used for aluminum welding wire. V type wire roll is used for solid welding wire. Iron, stainless steel, aluminum, galvanized sheet, carbon steel and other metals.
1x 110v to 220v Adaptor. Supports the use of solid/flux cored wire of. 0.6/0.8/0.9/1.0mm. Note: The MIG function does not display the current, only the wire feed speed. 1.6 to 4.0mm welding rods.TIPS: Built-in anti-stick, hot start system. Recommend using tungsten needles within a diameter of 3.2mm for arc start. Note: tig torch not included.
Item Processing Time: The processing time for a specific order varies with the product type and stock status. If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival.