EWM518 110V Welding Machine MIG IGBT Automatic Feed Flux Core Gasless Inverter

  

EWM518 110V Welding Machine MIG IGBT Automatic Feed Flux Core Gasless Inverter. The Autool EWM518 welding machine applies the most advanced inversion technology. The principle of inversion is to transform the power frequency of 50Hz/ 60Hz into direct current and invert it into high frequency through high-power device IGBT, then perform voltage-drop and commutation with the output high-power D. C power supply via Pulse Width Modulation (PWM).

Since the switch power inversion technology is adopted, the weight and volume decrease greatly while the conversion efficiency increase of more than 30%. The machine is self-shielded flux cored welding machine, which is equipped with unique electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed transfer resulted in better performance than other machines. Compared with silicon controlled welding machine and tapped welding, our products have the following advantages. Stable wire, feed rate, portable, energy-saving, electromagnetic noise free. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle etc.

This equipment is of high-efficiency; power-saving etc. Suitable for home usage and demand of different metal or techniques.

Power compensation, wide network voltage, good welding performance under the range of 90-140V. The minimum current can reach 30A, which can weld thin plates.

Good welding performance, spatter is obviously reduced. High inverter frequency, 60K Hz.

Below gear 1, standby can be realized and power consumption can be reduced. Weldable 0.6-0.8 (0.9) flux cored wire. The unified operation is simple. The world's first out-of-network topology, coupled with the energy recovery device, achieves real high efficiency and energy saving, with significantly improved efficiency and power factors.

Increase motor speed feedback to improve wire feeding accuracy. Unique design of double U-shaped descending output characteristics, good arc length stability, small splash and soft arc. Connect the power supply, the machine is in standby state when the pointer points to "standby", and the power indicator lights on when the pointer is adjusted to 1 or more. Ready for the wire inching.

Turn the knob to set the current. The power source is synergic designed, After the current is configured, the machine automatically matches the feeding speed.

Keep working surrounding safe: The air humidity level should not be higher than 90%. The temperature should be between -10°C to 40°C. Never cut off the power supply arbitrarily. The phenomenon listed below may happen due to relevant accessories used, welding material.

Pleas improve surroundings and avoid these problems. How to do with that? A Examine whether grounding wire clamp contacts with the work pieces well. B Examine whether each joint has improper contact.

Why the output current fails to reach rated value? The deviation of power voltage from rated value may cause that the output current does no accord with adjusted value. When the power voltage is lower than rated value, the maximum output current may be lower than rated value. When the current can not keep stable during operation, how to deal with? This situation may relate to the following factors. A The voltage of electric power network changes. B Serious interference from electric power network or other electric facilities. 1AUTOOL M518 ARC MIG Inverter Welding Machine 1User manual 1Flux-cored wire and accessories 1 Shoulder strap. Transit time includes normal weekdays. We are a professional worldwide wholesale company, with own factory located in China. A shop specializing in auto repair tools. Please pay attention to us! We are a professional Authorized dealers of. Also offer reasonable prices, excellent customer service and a reliable credit standing are our target! It now own three warehouse in the world. China warehouse, United States warehouse, Germany warehouse. It is now one of the biggest online commercial corporations in China.

We work hard to make sure every customer 100% satisfied and resolve any problem for you. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders".

The seller is "qpking_official_store" and is located in this country: US. This item can be shipped to United States.

• Brand: AUTOOL
• Manufacturer Part Number: M518
• Warranty: 3 Year
• Custom Bundle: No
• Modified Item: No
• Country/Region of Manufacture: China
• Voltage: 110V
• Frequency（Hz）: 50/60
• No-load voltage(V): 55
• Power supply（V）: 1 phases 120V±15%
• Rated input current(A): 20
• Angle welding thickness: 30-90A
• Duty cycle: 25%
• Welding Process: Stick
• Features: controled by IGBT,Digital chip control
• Features 1: Line Voltage Compensation
• Features 2: Thermal Overload Protection
• Features 3: With Gas,Automotive feed
• Features 4: energy save,electromagnetic noise free
• Features 5: deep welding pool,efficiency
• Item Type: Flux Core Welder
• Welded Material: Aluminum