HITBOX TIG Welder AC DC 110V 220V TIG ARC MMA Welding Machine PFC Weld Aluminum

  

HITBOX TIG Welder AC DC 110V 220V TIG ARC MMA Welding Machine PFC Weld Aluminum. ALUMINUM WELDER - The 110/220V AC/DC pulse tig welder can weld metal steel and aluminum plate. MULTI-FUNCTION WELDER- TIG, Pulse TIG, MMA, AC square wave 4 in 1 high frequency equipment. With PFC wide voltage input, stable DC voltage output, 40% power saving, greatly inprove the welding performance. READY TO USE: Accessories including 1 digital tig torch, 1 earth clamp, 1 gas tube, 1 electrode holder, 1 convert plug, 1 foot pedal.

EASY CONTROL PANEL, EXCELLENT WELD CHARACTERISTICS - The panel of Hitbox TIG200PACDC welder is very simple which make it much more easier to operate. Our 24 hours online customer service will help you fix it. The HITBOX welding machines are widely used in indoor decoration, DIY jobs, and other high working places jobs. The HITBOX welding machines are widely used for professional welders and welding hobbyist. As the technology improved day by day, the welding machine get much more portable and economical, it becames a common necessary tool in a family.

Every family should keep one. Lift TIG and HF Start Modes for versatility when welding around sensitive electronic equipment. Adjustable arc force, hot start and anti stick control for greater control and ease of use when MMA welding. Electronic HF TIG arc ignition system for contamination free and easy arc starting with low EMF interference. High performance on ultra thin surfaces with no deformation.

Digital display meter for accurate setting and feedback of welding output. Equipped with temperature, voltage and current sensors for high protection. Designed to work with diesel generators and to avoid failures due to its voltage spikes.

Up/ Down Button Remote Control torch. Roller wheel amps control on torch. MCU control system, responds immediately to any changes.

High frequency and high voltage for arc igniting to ensure the success ratio of igniting arc, the reverse polarity ignition ensures good ignition behavior in TIG-AC welding. Avoid AC arc-break with special means, even if arc-break occurs the HF will keep the arc stable. Pedal control the welding current.

TIG/DC operation, If the tungesten electrode touches the workpiece when welding, the current will drop to short-circuit current to protect tungsten. Intelligent protection: over-voltage, over-current, over-heat, when the problems listed before occurred, the alarm lamp on the front panel will be on and the output current will be cut off. It can self-protect and prolong the using life. Double purposes: AC inverter TIG/MMA and DC inverter TIG/MMA, Excellent performance on Al-alloy, carbon steel, stainless steel, titanium. According to choosing the front panel functions, the following six welding ways can be.

DC MMA / DC TIG / DC Pulse TIG / AC MMA / AC TIG / AC Pulse TIG. For DC MMA, polarity connection can be chosen according to different electrodes. For AC MMA, magnetic flow caused by invariable DC polarity can be avoided.

For DC TIG, DCEP is used normally (workpiece connected to positive polarity, while torch connected to negative polarity). This connection has many characters, such as stable welding arc, low tungsten pole loss, more welding current, narrow and deep weld. For AC TIG (rectangle wave), arc is more stable than Sine AC TIG. At the same time, you can not only obtain the max penetration and the min tungsten pole loss, but also obtain better clearance effect.

DC Pulsed TIG has the following characters. Metal in Molten pool has short time on high temperature status and freezes quickly, which can reduce the possibility to produce hot crack of the materials with thermal sensitivity. 2 The workpiece gets little heat. Be suitable for thin sheet and super thin sheet welding.

3 Exactly control heat input and the size of the molten pool. The depth of penetration is even. Be suitable for welding by one side and forming by two sides and all position welding for pipe. 4 High frequency arc can make metal for microlite fabric, eliminate blowhole and improve the mechanical performance of the joint. 5 High frequency arc is suitable for high welding speed to improve the productivity.

1X HF Tig torch torch. 1X3M 16MM2 Cable+ earth clamp. 1X3M 16MM2 Cable+ electrode holder. Item Processing Time: The processing time for a specific order varies with the product type and stock.

All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve.

Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. Taking any action, please co. The item "HITBOX TIG Welder AC DC 110V 220V TIG ARC MMA Welding Machine PFC Weld Aluminum" is in sale since Wednesday, January 20, 2021.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\TIG Welders". The seller is "usawelduk" and is located in Monroe Township, New Jersey.

This item can be shipped to United States.

• Model: AC DC TIG200P PFC
• Country/Region of Manufacture: China
• Power factor: 0.99
• MPN: Does Not Apply
• Brand: HITBOX
• Item Type: TIG Welder
• Welded Material: Aluminum, iron, stainless steel
• NO load voltage: 86(TIG),57(MMA)
• Pluse frquency: 0-20
• AC frquency: 60-160
• Clearance effect(%): 60-90
• Insulation class: IP23
• Protection class: H
• Cooling: AF
• Warranty date: 2 years